Equipment/Software/Literature

June 18, 2001
With two-wire, 4-20 ma loop power electronics, the NuTec insertion level switch promises to meet oil field intrinsic safety requirements.

Intrinsically safe level switch

With two-wire, 4-20 ma loop power electronics, the NuTec insertion level switch promises to meet oil field intrinsic safety requirements.

The Model LS2000 switch helps eliminate expensive instrument conduit runs in explosive environments, the company says. The switch is also suited for retrofitting two-wire mechanical float and flow paddle switches without changing or adding wires.

Combining accuracy with reliability, the LS2000 is designed for service in nearly all fluid wet or dry applications. It is responsive as well, >500 ms maximum following a step change in level. It operates at temperatures of 40-250° F. and at operating pressures as high as 500 psig. Made with 316 stainless steel for all wetted surfaces, it can be top or side mounted. The unit's level accuracy is 1/8 in. from the flow element center line. Approvals include FM, CENELEC, CSA, and CE Mark (pending).

Source: Fluid Components International, 1755 LaCosta Meadows Drive, San Marcos, CA 92069.

New oil analyzer models made of stainless steel

New models of the H2Oil Analyzer System include 4, 6, and 8 in. versions with ANSI Class 150, 300, and 600 flange ratings. The product features optional all 316 SS construction.

The system is designed specifically for applications including well testing, flow station, pipelines, oil movement and storage, and custody transfer.

Its stainless-steel construction makes it suited for offshore applications.

It accurately measures the amount of water in continuous-oil phase or continuous-water phase conditions through the entire composition range of 0-100% water. It incorporates a patented, simultaneous admittance sensor, which provides enhanced performance over older technologies. One model covers all water-percentage measurements for a specific line, eliminating the need for multiple models, the maker points out.

It offers:

  • Effective automation of production facilities, including well test and flow stations.
  • Detailed knowledge of oil reservoir.
  • Reduced cost of operations.
  • Improved performance for percent water/oil measurement.

Source: Honeywell Industrial Ccontrol, 16404 N. Black Canyon Highway, Phoenix, AZ 85053.

Guide to reciprocating compressor valve service

A simplified 2 page guide to reciprocating compressor valve service describes how the service helps maintain reliable performance for reciprocating compressor valves, regardless of type or brand.

A copy of the guide, Compressor Valve Service, may be obtained on line at www.dresser-rand.com by using the Contact D-R form, or by emailing your request to info@dresser rand.com.

Source: Dresser-Rand, Box 560, Olean, NY 14760.

Free metering and mixing pump brochure

Click here to enlarge image

A new brochure, free for the asking, describes metering and mixing pumps and injection package solutions for offshore and onshore applications.

The "LEWA Pumps and Packages for Oil and Gas Offshore and Onshore" brochure describes packed plunger and sealless hydraulically actuated diaphragm pumps with a total performance range covering flows up to 45,000 gph and pressures up to 17,000 psi. Featured are metering packages for the production, transfer, and processing of crude oil and natural gas.

The brochure includes installation photographs and descriptions. Line drawings illustrate offshore injection packages built to fit the space available.

Source: American Lewa Inc., 132 Hopping Brook Rd., Holliston, MA 01746.

CD discusses hydraulic hose

A new product catalog on CD discusses high pressure hydraulic hose.

The wire reinforced thermoplastic hose line covers a pressure range of 5,000-50,000 psi and sizes up to 1 in. ID. With one click, you can access each hose section according to the type hose and pressure you need. End fittings, accessories, and quick connect couplings are also categorized to help you find what you need quickly. With just one mouse click, you can also print the entire catalog.

Source: Spir Star Inc., 11983 FM 529, Houston, TX 77041.

Free rod guide brochure

A new product brochure, yours free upon request, details New Era and Patco rod guides. They feature advanced design characteristics that promise increased production and decreased workover costs, the company says. They are made from a complete line of engineered plastics enhanced with performance additives. The 28 page product brochure provides information on applications, technical drawings, specifications charts, and materials of construction.

The product lines include rotating rod guides for use with progressing cavity pumps as well as high-performance and classic rod guides for use with reciprocating beam pumps.

Through its rod guide advisory program, the firm applies a systems approach to each customer, analyzing wellbore deviations, dynamometer readings, workover histories, well operating conditions, completion information, and production data to determine optimal rod guide design and spacing for each well.

Source: R&M Energy Systems, 363 N. Sam Houston Parkway, Suite 950, Houston, TX 77060.