True Vertical Depth news and technical articles from Oil & Gas Journal. Search True Vertical Depth latest and archived news and articles
in two back-to-back programs on the company’s Rharb permits. Gulfsands will drill AKR-1 to 1,450 m true vertical depth to evaluate two distinct Miocene-aged reservoirs, contained within a fault-bound structural closure, that
275 b/d and 825 Mcfd with 750 psi flowing tubing pressure. Drilled to 11,600 ft measured depth, 7,995 ft true vertical depth , it has a 1,283-ft lateral in the F-30 sand. The Hulk well went to 12,155 ft MD/9,326 ft TVD, including
technologies using 13-16 stages (Fig. 6). In 2008, the average Haynesville well was drilled to 11,500 ft true vertical depth , 14,700 ft measured depth, and 4,470 ft horizontal length. In 2012, the average Haynesville well was drilled
interest and FieldPoint 25%. FieldPoint has working interests in 72 producing oil and gas wells in Serbin field, 50 miles east of Austin. Cretaceous Taylor sand produces 46Â° gravity oil from 5,300-5,600 ft true vertical depth .
offloading vessel. Each well is to have 5,000 m of total drilled footage with a horizontal section at 2,190 m true vertical depth in the reservoir, a turbiditic sandstone in the Miocene Galoc formation in the Palawan basin. Galoc field, on
a viscosified liquid form allowing for a wide range of application. GasFrac has successfully treated wells to a true vertical depth of 13,000 ft with bottom hole temperatures approaching 300Â° F. "Using hydrocarbons to fracture these wells
facilities with an estimated cost of $24.1 million. The wells will have a 750-m horizontal length at 650 m true vertical depth . Site preparation is under way, and it is expected that the horizontal well pair will be drilling in the second
Morocco’s state ONHYM on another Moroccan block. Capricorn plans to drill the FD-I exploratory well to 5,500 m true vertical depth subsea in 1,500 m of water 120 km offshore Morocco on the Foum Draa block using the Cajun Express fifth generation
interest. The well is to be drilled directionally from a three-well pad to 10,300 ft measured depth, 9,900 ft true vertical depth , with the Cretaceous Villeta formation as the primary target. Drilling time is put at 45 days.
sidetracking, may be undertaken in the event of success. Malida-1 is to go to 2,670 m measured depth, 2,640 m true vertical depth , in 47 m of water in about 18 days. Interests are MP G1 (Thailand) 60%, Northern Gulf Petroleum Pte. Ltd