Home>Topics>Polymer Injection
  1. All
  2. Magazine Articles
  3. Online Articles

Polymer Injection

Polymer Injection news and technical articles from Oil & Gas Journal. Search Polymer Injection latest and archived news and articles

  1. OGJ Newsletter

    Magazine Articles

    Mon, 31 Oct 2011

    owned Oil & Natural Gas Corp. (ONGC), which holds a 30% interest in the block. In August, Cairn India began polymer injection for enhanced oil recovery in Mangala. Cairn Energy expects production from the three fields to reach 240,000 b

  2. Large subsea template expands Captain field

    Magazine Articles

    Mon, 16 Jul 2001

    water injection, and future polymer injection . Texaco North Sea UK Co ..... service and the other for future polymer injection . The template manifold incorporates ..... inclusion of a diver-installed polymer injection package. A Cameron CAMTROL

  3. Shell’s interest in enhanced oil recovery grows

    Magazine Articles

    Mon, 20 Nov 2006

    to 20-25% from the current 2-3% estimate. Polymer injection Another project in Oman will inject polymer and surfactant ..... a pilot in the 1980s showed the effectiveness of polymer injection to increase oil recovery, but low oil prices forestalled

  4. SPECIAL REPORT: More US EOR projects start but EOR production continues decline

    Magazine Articles

    Mon, 21 Apr 2008

    Alam to come on stream in 2010 and produce about 30,000 bo/d and to start in 2008 steam injection in Fahud and polymer injection in Marmul. In Oman, Occidental is also developing the Mukhalza steam injection project. About this report

  5. Continued Alberta oil sands production growth seen

    Magazine Articles

    Mon, 12 Jul 2010

    assisted gravity drainage (including experimental methods), and 31% by primary means (including water and polymer injection ). Mined production in 2009 increased by 14% compared with 2008. Syncrude produced 40% of the mined production

  6. High-volume ESPs restore oil production in Suriname

    Magazine Articles

    Mon, 12 Oct 2009

    NV. He is involved in the high water cut strategy of the company and contributes to the completion design for the polymer injection pilot project. Grauwde has an MSc in petroleum engineering from the Technical University of Delft in the Netherlands

  7. OGJ Newsletter

    Magazine Articles

    Mon, 8 Feb 2010

    secondary recovery. Cairn has a pilot project testing enhanced recovery with polymer and alkaline-surfactant- polymer injection , which the company estimates might boost recovery from the Mangala complex by 300 million bbl. Processing — Quick

  8. Considerable potential remains after Daqing polymer flood

    Magazine Articles

    Mon, 15 Sep 2008

    flooding has shown good technical and economic results. By November 2007, Daqing already had 14 areas in which polymer injection had finished. These 14 areas have more than 2,000 production and injection wells. Oil recovery after polymer

  9. Production rising at Mangala field in India

    Online Articles

    Thu, 28 Jan 2010

    secondary recovery. Cairn has a pilot project testing enhanced recovery with polymer and alkaline-surfactant- polymer injection , which the company estimates might boost recovery from the Mangala complex by 300 million bbl.

  10. Gels correct in-depth reservoir permeability variation

    Magazine Articles

    Mon, 6 Jan 1997

    of total flow into each sandpack. Uncrosslinked polymer injection caused diversion of about 20% of the total flow ..... aluminum citrate, finally followed by more long-term polymer injection . An operator could not determine the benefits until

Stay Connected