Polymer Injection news and technical articles from Oil & Gas Journal. Search Polymer Injection latest and archived news and articles
quarter due to the expansion of infill drilling and polymer injection . In the first quarter, production response from the ..... expected later this year and in 2014 in response to the polymer injection . Cenovus invested $143 million at Pelican Lake
by about 11%. Since 1996, polymer injection has started on five tracts ..... These include polymer flooding, polymer injection with high production rates, and no polymer injection but with a natural waterflooding
treatments can lengthen the polymer injection effectiveness to 30 months from ..... injectivity problems in the polymer injection wells. Daqing Oil Field Co ..... Polymer flooding About 12% of polymer injection wells at Daqing had poor injectivity
owned Oil & Natural Gas Corp. (ONGC), which holds a 30% interest in the block. In August, Cairn India began polymer injection for enhanced oil recovery in Mangala. Cairn Energy expects production from the three fields to reach 240,000 b
in operation, especially the polymer injection in Daqing and the heavy oil ..... Development Oman plans for the Marmul polymer injection project to add 10,000 bo ..... also will commission the Marmul polymer injection project (Fig. 1) and is continuing
assisted gravity drainage (including experimental methods), and 31% by primary means (including water and polymer injection ). Mined production in 2009 increased by 14% compared with 2008. Syncrude produced 40% of the mined production
NV. He is involved in the high water cut strategy of the company and contributes to the completion design for the polymer injection pilot project. Grauwde has an MSc in petroleum engineering from the Technical University of Delft in the Netherlands
secondary recovery. Cairn has a pilot project testing enhanced recovery with polymer and alkaline-surfactant- polymer injection , which the company estimates might boost recovery from the Mangala complex by 300 million bbl. Processing — Quick
Alam to come on stream in 2010 and produce about 30,000 bo/d and to start in 2008 steam injection in Fahud and polymer injection in Marmul. In Oman, Occidental is also developing the Mukhalza steam injection project. About this report
surfactant to enhance oil recovery in Marmul field. Barry said a pilot in the 1980s showed the effectiveness of polymer injection to increase oil recovery but low oil prices forestalled the project's start-up. Now that the project has been