Export Riser news and technical articles from Oil & Gas Journal. Search Export Riser latest and archived news and articles
production rates at P-52 required an 18-in. oil export pipeline. Instrumented pigging requirements dictate the export riser have the same diameter. This large-bore specification, combined with the deepwater site, put this application outside
Analyses assessing the possible use of a free-standing hybrid riser (FSHR) as part of an offshore field development export system should both thoroughly address fatigue damage during installation and determine the allowable sea states for deployment.
The export pipeline system includes two modules permitting future connections and another serving as a contingency for the freestanding hybrid riser (FSHR), making the infrastructure flexible enough to be used in its full capacity after the original field is depleted.
Shell Philippines Exploration & Production to replace an export riser shutdown valve at an offshore natural gas production ..... a 24-in. Class 1500 actuated ball valve on the export riser , and a nearby manual block valve both required removal
production and annulus tubing and export riser . At the top of the riser, five ..... for running the 12-in. OD oil export riser through the 20-in. landing string ..... joints. Later, the 8-in. OD gas export riser was run in the 10-in. ID guide
including all risers. Both the export riser and IHUB’s production risers were ..... by Allseas’ Solitaire. The export riser lay parallel to one of the production ..... s 20-in. steel catenary export riser . The starboard crane includes two traction
satellite platform jacket, damaging the 12-in. OD export riser and a large portion of the connected topside pipeworks ..... satellite platform jacket, damaging the 12-in. OD export riser (highlighted in red). The impact damaged the riser
however, about 12 cu m/year of water and glycol are carried over from the dehydration system. Inspection of the export riser on the gas platform in 2002 and 2003 predicted metal loss after 20 years of between 0.8 and 1.5 mm. This compares
previously used this mission-oriented approach in a 2004 Forties repair: replacing the 12-in. OD Forties Echo export riser with a new steel riser in 84 days from a standing start and with an installation contractor other than that which had
for high pressure and temperature service. The gas- export riser base (ERB) with a subsea pig launcher and necessary components ..... illustrates the offshore pipeline-protection system. Export riser Norway requires all pipelines to be piggable. In addition