New drive for well pumping operations
A new Vector drive, designed specifically for pumping applications, features an easy-to-use operator control panel that includes a large, high-resolution, full-color graphics display that is easy to read in bright light.
The Vector VII’s software integrates operating information, downhole well parameters, and graphical data into a common display, eliminating the time it takes to scroll through several screens to retrieve data. A digital circular ammeter is displayed on the operator panel; therefore, the use of a mechanical circular ammeter for chart recording is no longer needed, the firm notes. Twenty operating parameters are periodically sampled and stored in memory and can be shown graphically on the operator panel or downloaded and saved for future analysis. Remote user interface and monitoring and control functions are also supported.
In addition, the Vector VII comes in a Nema 3R-rated outdoor enclosure. All electronic components are located inside a sealed (Nema 4) section of the drive enclosure with no exchange of outside cooling air. Vector VII is suitable for arctic, desert, and rain forest climates, operating in temperature ranges of –40° C. to +50° C. (–40° F. to +122° F.).
Source: Wood Group ESP, 17420 Katy Freeway, Suite 300, Houston, TX 77094.
Vibration transmitter monitors, warns continuously
The new CSI 9330 vibration transmitter continuously monitors critical rotating machinery for early detection of developing mechanical issues.
It’s the latest in this firm’s line of vibration transmitters, which include multi-sensor as well as wireless solutions.
The CSI 9330 can be deployed on any asset, but is typically installed on motor-fan, motor-pump, motor-compressor, and cooling tower applications.
Once installed, it converts the analog output of an integrated circuit piezoelectric accelerometer into a 4-20 ma signal, proportional to monitored vibration and also delivers patented PeakVue measurements that provide additional insight into the condition of rotating element bearings and gearboxes.
The CSI 9330 is available in two configurations. The CSI 9330VP provides overall vibration and PeakVue data when connected to a standard accelerometer. The CSI 9330VT provides vibration and temperature data when connected to an accelerometer with an embedded temperature capability.
Source: Emerson Process Management, 12301 Research Blvd., Bldg. III, Austin, TX 78759.
