View Article as Single page
65-90° C.
Yield on crude, mass %: 15.4
Yield on crude, vol %: 15.62
Density at 15° C., kg/l.: 0.7206
Specific gravity at 60/60° F.: 0.7208
API gravity at 60/60° F.: 64.8
Sulfur, mass %: <0.001
Mercaptan sulfur, mg/kg: 7
n-Paraffins, mass %: 25.4
i-Paraffins, mass %: 27.5
Naphthenes, mass %: 35.1
Aromatics (incl. benzene), mass %: 11.9
Benzene, mass %: 11.3
n-Paraffins, vol %: 27.6
i-Paraffins, vol %: 29.5
Naphthenes, vol %: 33.1
Aromatics (incl. benzene), vol %: 9.8
Benzene, vol %: 9.2
Vapor pressure (DVPE1), kPa: 33.4
Research octane no. (RON): 68.5
Motor octane no. (MON): 66.4
Research octane no. (RON): 268.3
Motor (MON): 266.2
Nitrogen, mg/kg: <1
90-150° C.
Yield on crude, mass %: 32.82
Yield on crude, vol %: 31.73
Density at 15° C., kg/l.: 0.7561
Specific gravity at 60/60° F.: 0.7563
API gravity at 60/60° F.: 55.6
Sulfur, mass %: <0.001
Mercaptan sulfur, mg/kg: 5
n-Paraffins, mass %: 20.0
i-Paraffins, mass %: 23.4
Naphthenes, mass %: 37.3
Aromatics (incl. benzene), mass %: 19.3
Benzene, mass %: 0.5
n-Paraffins, vol %: 21.7
i-Paraffins, vol %: 24.9
Naphthenes, vol %: 36.6
Aromatics (incl. benzene), vol %: 16.8
Benzene, vol %: 0.5
Flash point, °C.: <10
Nitrogen, mg/kg: <1
150-180° C.
Yield on crude, mass %: 9.37
Yield on crude, vol %: 8.82
Density at 15° C., kg/l.: 0.7796
Specific gravity at 60/60° F.: 0.7799
API gravity at 60/60° F.: 49.9
Sulfur, mass %: 0.005
Mercaptan sulfur, mg/kg: 8
Copper corrosion: 1a
Total acid no., mg KOH/g: <0.01
| Test conditions: True boiling point distillation Equipment The distillation up to 240° C. is performed according to D-2892. Conditions* Cut points are as follows: • Atmospheric distillation: C5-180° C. AET. • 100 Torr: 180-240° C. AET. The atmospheric cut points are corrected to 760 mmHg. Volume: Volume expansion or contraction is normalized among fractions boiling at less than 150° C. in proportion to their yields. (Usually the "loss" is negative due to volume expansion.) Loss: Loss up to 240° C. AET is distributed with two-thirds in the gas-fraction and one-third in the first liquid fraction. *AET = average equivalent temperature; Torr. ≈ 1 mmHg ≈ 0.0193 lbf/sq in. |
n-Paraffins, mass %: 21.6
i-Paraffins, mass %: 29.7
Naphthenes, mass %: 27.1
Aromatics, mass %: 21.6
n-Paraffins, vol %: 23.3
i-Paraffins, vol %: 31.0
Naphthenes, vol %: 26.3
Aromatics, vol %: 19.4
Aromatics (HPLC1)
Total, mass %: 20.2
Monoaromatics, mass %: 20.2
Diaromatics, mass %: <0.1
Polycyclic aromatics, mass %: <0.1
Naphthalenes, vol %: 0.02
Aniline point, °C.: 52.3
Smoke point, mm: 26.0
Flash point, °C.: 41.5
Freezing point, °C.: <–60
Cetane index (D-976): 32.2
Calculated cetane index (D-4737): 37.1
Kin. vis. at 20° C., cst: 1.08
Kin. vis. at 50° C., cst: 0.76
Nitrogen, mg/kg: <1
Distillation D-86 (50%), °C.: 159.6
180-240° C.
Yield on crude, mass %: 10.93
Yield on crude, vol %: 10.02
Density at 15° C., kg/l.: 0.8003
Specific gravity at 60/60° F.: 0.8006
API gravity at 60/60° F.: 45.2
Sulfur, mass %: 0.017
Mercaptan sulfur, mg/kg: 5
Copper corrosion: 1a
Total acid no., mg KOH/g: <0.01
Aromatics (HPLC1)
Total, mass %: 18.0
Monoaromatics, mass %: 15.6
Diaromatics, mass %: 2.4
Polycyclic aromatics, mass %: <0.1
Naphthalenes, vol %: 1.57
Aniline point, °C.: 62.8
Smoke point, mm: 23.0
Freezing point, °C.: –50.0
Cloud point, °C.: <–51
Cold-filter plugging point, °C.: <–50
Pour point, °C.: <–48
Cetane no.: 50.3
Cetane index (D-976): 44.9
Calculated cetane index (D-4737): 46.6
Kin. vis. at 20° C., cst: 1.80
Kin. vis. at 50° C., cst: 1.15
Nitrogen, mg/kg: <1
Distillation D-86 (50%), °C.: 201.3
Displaying 2/4
View Article as Single page
